Labeling Channels - Sansui HDLCD1908 Owner's Manual

NOTE:
• If a channel with no broadcast is selected, the
sound will automatically be muted.
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
To select the video input source
To view a signal from another device connected to
your LCD TV, such as a VCR or DVD player, press
INPUT, then press
buttons (0-3). You can select TV, Video, Component
or PC depending on which input jacks you used to
connect your devices.
Source Selection
0.TV
1.Video
2.Component
3.PC
[0-3]:Select
CH + / -
Press and release CH + / -. The channel
automatically stops at the next channel set into
memory.
For proper operation, before selecting channels, they
should be set into the memory. See "Memorizing
channels" on pages 15 and 16.
DISPLAY
Press DISPLAY to display the current information on
the screen.
When the TV receives a digital signal, the digital
information will appear.
62-001 HDTV Moving Picture1
CH-1
Digital Air
No Program Information is available
Full
1080i
• Channel number
• Channel label (if preset) • Signal type
• V-Chip rating
• Sleep timer
• Program guide
• Resolution
When the TV receives a analog signal, the analog
information will appear.
14
Analog Cable
Full
480i
• Channel number
• V-Chip rating
• Sleep timer
• Picture size
Press DISPLAY again to clear the call display.
NOTE:
• After a few seconds, DISPLAY screen will return to
normal TV-operation automatically.
Downloaded from www.Manualslib.com
/ or corresponding Number
Sleep Timer
Off
English
• Station name
• Audio language
• Picture size
Sleep Timer
Off
• Channel label (if preset)
• Signal type
• Audio information (Stereo or SAP)
• Resolution
manuals search engine
RECALL
This button allows you to go back to the last channel
selected by pressing RECALL. Press RECALL again
to return to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV's sound
will be silenced and "Mute" will appear on the screen.
The sound can be switched back on by pressing this
button again or the VOL + or –.
SLEEP
To set the TV to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count up 10 minutes for each press of the SLEEP
button (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the
sleep time is programmed, the display will appear
briefly every ten minutes to remind you that the sleep
timer is operating. To confirm the sleep timer setting,
press SLEEP and the remaining time will be displayed
for a few seconds. To cancel the sleep timer, press
SLEEP repeatedly until the display turns to Off.
S l e e p Ti m e r
0 h 1 0 m

Labeling channels

Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any four characters to identify a
channel.
To create channel labels
1
Press MENU, then press
"Channel" menu, then press
2
Press or to select "Ch Label", then
press or ENTER.
The "Ch Label" menu will appear.
3
Press or to select a channel you want to label,
then press .
Ch Label
Channel Number 15-1
Ch Label
Label Clear >>
4
: Select : Adjust
Press or repeatedly until the character you
want appears in the first space.
Ch Label
Channel Number 15-1
Ch Label A
Label Clear >>
: Select : Adjust ENTER:Set
or to select
or ENTER.
17