Checking The Digital-Signal Strength; Labeling Channels; Labeling Video Inputs - Sansui SLED1980 Owner's Manual

Clear All
All channels are deleted from the channel memory.
] Select"Channel", then press • or ENTER.
2
Press • or • to select"Add/Delete", then press •
or ENTER.
3
Press • or • to select"Clear AIF, then press • or
ENTER.
Checking the digital-
signal strength
This TV will allow you to view the digital signal
meter for digital channels.
1
2
3
Select "Channel", then press • or ENTER.
Press • or • to select "DTV Signal".
Press ENTER to check the Digital-signal strength.
The Digital-signal strength screen will appear.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
NOTE:
• Signal meter feature is not available for analog
channels.
• After 240 seconds, DTV Signal screen will return to
normal TV-operation automatically.
Labeling channels
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any four characters to identify a
channel,
To create channel labels
1
2
3
Select "Channel", then press • or ENTER.
Press • or • to select "Ch Label", then press •
or ENTER.
The "Ch Label" menu will appear.
Press • or • to select a channel you want to
label, then press •.
4
Press • or • repeatedly until the character you
want appears in the first space.
The characters rotation as follows:
r 0 .,.9 <-_>A...Z .... () @1*=- ,e]
) SPACE <
5
6
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
When you finish inputting the label name, press
EXIT to return to the normal screen.
Repeat steps 3-4 for other channel. You can
assign a label to each channel.
To clear a Ch Label
After step 3 above, press • or • to select "Label
Clear", then press • or ENTER.
NOTE:
• The channel labels will be reset after "Automatic
Search" on page 19.
Labeling video inputs
The Video Label feature allows you to label each
input source for your TV.
1
Select"Setup", then press • or ENTER.
2
Press • or • to select"Video Label", then press
• or ENTER.
3
4
Press • or • to select an input which you want to
label.
Press • or • to select the desired label for that
input source.
- : Uses the default label name
VCR :Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : HDMI device (only for HDMI inputs)