Adding And Removing Adapter Cards For Type 6266; Installing Adapter Cards - IBM 6266 User Manual

Adding and removing adapter cards for type 6266

The system board includes three PCI adapter card connectors (only the low-profile
PCI cards will fit).
Note:

Installing adapter cards

Your computer provides expansion slots for PCI adapter cards only.
Follow these steps to install an adapter card:
1. Align and insert the adapter card into the adapter card connector.
2. Secure the card with the screw to the system chasis
3. If your card has cables, connect the cable or cables from the adapter card to
the correct connection on the system board or CD-ROM drive.
4. Reinstall all hardware that you removed prior to the installation of the adapter
card.
If you disconnected any cables to gain access to the adapter card connector on the
system board, reconnect the cables.
6-4 IBM Personal Computer User Guide
Make sure that you have followed the proper
procedure in "Opening the system unit" on page 5-5.
This ensures that you discharge the static electricity
that you may have accumulated.