ZyXEL Communications P-660H-T Series Quick Start Manual page 8

Note: Wireless clients and the Prestige must use the same SSID, channel ID, WEP or WPA-PSK key (if
enabled).
1 Click the Wireless LAN link under
Advanced Setup.
3 Click Advanced Setup, Wireless LAN, Wireless. In the ESSID field, enter up to 32 printable characters to
uniquely identify the Prestige. If you didn't configure WPA-PSK, configure WEP in this screen (not visible
if you've configured WPA-PSK).
4 NAT
NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to
a different IP address in another. For example, you could translate one public IP address to multiple private IP
addresses on your LAN (SUA Only).
P-660HW-T and P-660H-T Series Quick Start Guide
Select
Authentication
Required, then
select WPA-
PSK and then
type a Pre-
shared Key.
2 Click 802.1x/WPA.
8