High-Level (Speaker) Inputs - Radio Shack XL-200 Owner's Manual

12-2016.fm Page 8 Monday, April 10, 2000 4:33 PM
1. Temporarily place the amplifier as close as possible to the selected mounting
location.
2. If your auto sound system has two line-out jacks , connect the auto sound system
to the amplifier as shown.
Note: If your auto sound system has four separate line-out jacks , use the auto
sound system's front left and right jacks to make this connection.
HIGH-LEVEL (SPEAKER)
INPUTS
If your auto sound system does not have
low-level line-out jacks but has only
speaker outputs, connect your auto
sound system's speaker outputs to the
amplifier's
HIGH INPUT
• If your auto sound system has two
speaker outputs, see "Two Speaker
Outputs" on Page 10 to connect
your system's speaker outputs to
the amplifier using either a floating
or common ground connection.
• If your auto sound system has four
speaker outputs, see "Four Speaker
Outputs" on Page 9 to connect your
8
Left
Auto Sound System
Note: A floating ground connection lets
the amplifier provide more power to
jacks.
each speaker, but requires that you con-
nect a separate wire to each speaker
terminal. A common ground connection
lets you use fewer wires to connect the
speakers to the amplifier, but reduces
the amount of power supplied to the
speakers from the amplifier.
Use the wire harness and twist-on termi-
nal connectors supplied with each am-
plifier to make the connections.
Connecting Inputs
Right
system's speaker outputs to the
amplifier using only the rear speak-
ers, or to use two amplifiers to con-
nect both the front
speakers.
and rear