Connecting Two Speakers (Unbridged Connection); Connecting A Subwoofer (Bridged Connection) - Radio Shack XL-200 Owner's Manual

12-2016.fm Page 12 Monday, April 10, 2000 4:33 PM

Connecting Two Speakers (Unbridged Connection)

This connection produces 100 watts per
channel.
1. Use a screwdriver to connect the left
speaker's positive (+) wire to the
amplifier's
SPEAKER L (+)

Connecting a Subwoofer (Bridged Connection)

1. Use a screwdriver to connect the
subwoofer's positive (+) wire to the
amplifier's
SPEAKER L (+)
12
Left Right
2. Use a screwdriver to connect the left
speaker's negative (–) wire to the
amplifier's
3. Repeat Steps 1–2 to connect the
terminal. right speaker's positive (+) and neg-
ative (–) wires to the amplifier's
SPEAKER R (+)
terminals.
Subwoofer
2. Use a screwdriver to connect the
subwoofer's negative (–) wire to the
terminal. amplifier's
3. Set
fier to
Connecting Inputs
SPEAKER L (–)
and
SPEAKER R (–)
SPEAKER R (+)
on the side of the ampli-
BRG/ST
.
BRG
terminal.
terminal.