Radio Shack XL-200 Owner's Manual page 17

12-2016.fm Page 17 Monday, April 10, 2000 4:33 PM
Symptom
No sound (continued)
Distorted sound
The amplifier's PROTEC-
TION indicator lights
Possible Cause
Power problem.
The amplifier might be
receiving too much input
power from your auto sound
system.
The amplifier might have
shut down.
An output channel might
have shorted.
The amplifier is not con-
nected to the auto sound
system correctly.
The amplifier might be
receiving too much power
from your auto sound sys-
tem.
Troubleshooting
Suggestion
Check the amplifier's and
auto sound system's fuses
and replace them if neces-
sary (see "Replacing a
Fuse" on Page 18).
Reduce your auto sound
system's output power (if
possible), or reduce the
auto sound system's vol-
ume.
Turn your auto sound sys-
tem off and let the amplifier
cool. Make sure the ampli-
fier is properly ventilated.
Then turn your auto sound
system back on. The ampli-
fier turns itself back on when
it is cooled.
Take the amplifier to your
local RadioShack store.
Check all connections.
Reduce your auto sound
system's output power (if
possible), or reduce the
auto sound system's vol-
ume.
17