High-Level (Speaker Wire) Inputs - Radio Shack XL-110 Owner's Manual

12-2014.fm Page 9 Tuesday, May 9, 2000 8:51 AM
HIGH-LEVEL (SPEAKER
WIRE) INPUTS
If your auto sound system does not have
low-level line out jacks but has only speaker
outputs, connect your auto sound system's
speaker outputs to the amplifier's
jacks.
PUT
• If your auto sound system has four
speaker outputs, see "Four Speaker
Outputs" on Page 10 to connect your
system's speaker outputs to the ampli-
fier using either a floating or common
ground connection.
• If your auto sound system has two
speaker outputs, see "Two Speaker Out-
puts" on Page 11 to connect your sys-
tem's speaker outputs to the amplifier
using either a floating or common
ground connection.
Note: A floating ground connection lets the
amplifier provide more power to each speak-
er, but requires that you connect a separate
wire to each speaker terminal. A common
ground connection lets you use fewer wires
to connect the speakers to the amplifier, but
reduces the amount of power supplied to the
HIGH IN-
speakers from the amplifier.
Use the supplied wire harness and the sup-
plied twist-on terminal connectors to make
the appropriate connections.
Connecting Inputs
9