Insignia NS-DGPK15 Quick Setup Manual

QUICK SETUP GUIDE
Everyday Adventures
Accessory Kit for GoPro®
NS-DGPK15
FEATURES
• Compatible with most GoPro cameras, including the HERO and
Session lines (camera must be in housing or frame to allow attach-
ment to accessories). Also compatible with other equipment adapted
to the standard GoPro mount.
• Perfect for carrying, storing, securing, and using your GoPro camera.
Accessories allow for use on cars, boats, and bikes, as well as
handheld, freestanding, or head mounting.
PACKAGE CONTENTS
• Accessories for GoPro (see table)
Note: Place your GoPro inside its housing (included with or attached to your
GoPro, not included with this kit) to mount with these accessories.
• Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
ITEM DESCRIPTION
Head strap Use to secure your GoPro to your head. Attach your GoPro using the thumb
screw. Adjust the head strap mount to fit comfortably and securely. Can be
worn backwards for a unique perspective.
Suction cup mount Use to attach your GoPro to cars, boats, or other vehicles. Screw the tripod
to GoPro mount adapter (see below) into the mount holder, then attach
your GoPro using the thumb screw. Press the suction cup to your vehicle's
surface, then push the lock down.
Note: Attach the safety cable to prevent your GoPro from falling.
Tripod to GoPro mount Use with the suction cup and bicycle handlebar mount or any other
adapter (2) standard tripod.
Safety tether cable Use in any situation where you risk losing your GoPro if it falls (for
example, while boating or biking). Connect directly to your GoPro and a
fixed object such as a boat railing, sideview mirror, or other suitable
location.
Note: Do not attach the safety tether cable to your body, clothing, or safety gear.
ITEM DESCRIPTION
Triple-flex handle with tripod Use to get a shot down low, up high, of yourself, or nearly
anything else. The detachable tripod stores inside the handle
for convenience and versatility.
Bicycle handlebar mount Use to attach the GoPro camera to handlebars, seatposts, ski
poles, and more. Use with the Tripod to GoPro mount
adapter.
Thumb screws (2) Use to secure your GoPro to mounts or adapters in this kit or
as replacements for other accessories.
Note: Thumb screws will come attached to other accessories. They
can be removed and used where they are needed.
Semi-hard carrying case Use to carry your GoPro and a few essential accessories.
Contains a spot for one Hero or Session camera, memory
cards and batteries, as well as a wide range of GoPro
accessories. The front open slot is intended for the triple flex
handle with tripod.
Note: To maintain portability, not all of the included accessories will
fit in this case. The intended use is on the go where all accessories
might not be required.
Note: The accessories, except the Semi-soft carrying case, are water resistant, but
they must be rinsed with clean, fresh water and allowed to dry completely after
use. Items used in salt water must IMMEDIATELY be rinsed with clean, fresh water
and dried after use. User is responsible for ensuring that the attached camera is
waterproof.
HOW TO USE THE TRIPLE-FLEX HANDLE WITH
TRIPOD
• This ultra-versatile mount is a three-in-one design. It can be used as a
camera grip, an extension arm, or a tripod for ultra-versatility and a
variety of shots.
Note: To protect your fingers from being pinched in case the unfolded arm
closes suddenly, press and hold the silver safety button to fully close the mount
once open. The button does not need to be pressed to open the mount.
Camera grip
Tripod
Extension arm