Cabinet Disassembly Instructions - FUNAI DR-C3835 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[9] FAN
[8] FAN COVER
[1] TOP COVER
[2] FRONT ASSEMBLY
[3] DVD MECHANISM & DVD MAIN CBA ASSEMBLY
[4] SW CBA
[5] PCB HOLDER
[10] REAR PANEL
[11] AV CBA
[12] JACK CBA
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] TOP COVER D1 8(S-1)
FRONT
[2] D2 *6(L-1), *3(L-2)
ASSEMBLY
DVD
MECHANISM
[3] & DVD MAIN D3
CBA
ASSEMBLY
[4] SW CBA D4 (S-3), Desolder
[5] PCB HOLDER D4 2(S-4)
POWER
[6] D4 2(S-5), *CN1152
SUPPLY CBA
POWER
[7] D4 (S-6)
HOLDER
[8] FAN COVER D5 2(S-7)
[9] FAN D5
[10] REAR PANEL D5
[11] AV CBA D6 3(S-11)
[12] JACK CBA D6 Desolder
[6] POWER SUPPLY CBA
[7] POWER HOLDER
[13] AFV CBA
Removal
Remove/*Unhook/
Unlock/Release/ Note
Unplug/Desolder
---
1
4(S-2), *CN101,
*CN701, LOCKING ---
CARD SPACERS
---
---
---
---
---
FAN EARTH,
---
*CN1601
(S-8), 6(S-9),
---
2(S-10)
---
---
ID/
Loc. Part
No.
[13] AFV CBA
↓ ↓
(1) (2)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
[1] TOP COVER
(S-1)
1-5-1
Removal
Remove/*Unhook/
Fig.
Unlock/Release/
No.
Unplug/Desolder
D6 Desolder
↓ ↓
(3) (4)
(S-1)
(S-1)
Fig. D1
E7B20DC
Note
---
↓
(5)