Solid-State Drive - HP EliteBook 840 G2 Notebook PC Maintenance And Service Manual

Solid-state drive

Description
512-GB, SATA-3 solid-state drive for use on all computer models
256-GB, SATA-3 solid-state drive for use only on HP ZBook 14 G2 Mobile Workstation computer models
256-GB, SATA-3 solid-state drive supporting TLC for use on all computer models
256-GB, SATA-3, SED solid-state drive supporting Opal 2 for use on all computer models
256-GB, M2, PCIe-2×2 solid-state drive for use on all computer models
240-GB, SATA-3 solid-state drive for use on all computer models
180-GB, SATA-3 solid-state drive for use on all computer models
180-GB, SATA-3, SED solid-state drive supporting Opal 2 for use on all computer models
128-GB, SATA-3 solid-state drive for use on all computer models
128-GB, SATA-3 solid-state drive supporting TLC for use on all computer models
32-GB, M2, SATA-3 solid-state drive for use only on HP EliteBook 840 G2 Notebook PC and HP EliteBook
740 G2 Notebook PC computer models
Before removing the solid-state drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see
5. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the solid-state drive to the system board. (The
solid-state drive tilts up.)
56 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Service cover on page
Battery on page 53).
51).
Spare part number
803386-001
803390-001
803389-001
803387-001
803381-001
803385-001
803384-001
803383-001
803382-001
803388-001
803391-001
ENWW