Hard Drive - HP EliteBook 840 G2 Notebook PC Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket or screws. The hard drive
bracket and screws are included in the Hard Drive Hardware Kit, spare part number 730793-001.
Description
1-TB, 7200-rpm, SATA, 9.5-mm hard drive for use on all computer models
500-GB, 7200-rpm, SATA, 7.0-mm hard drive for use on all computer models
500-GB, 7200-rpm, SED, 7.0-mm hard drive for use on all computer models
500-GB, 5400-rpm, FIPS, 7.0-mm hard drive for use on all computer models
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see
5. Remove the battery (see
Remove the hard drive:
1. Loosen the 4 hard drive retention screws (1).
2. Release the hard drive (2) by sliding it forward.
3. Lift the hard drive (3) and remove it.
54 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Service cover on page
Battery on page 53).
51).
Spare part number
766644-001
703268-001
703267-001
730946-001
ENWW