Display Name; User Name - Fortinet FortiFone User Manual

Display Name

When assigned, the Display Name is used in SIP calls as the Caller ID name.
To enter the Display Name:
• Press the
• Select 1. Line Configuration then press the OK button.
• Select 3. Display Name then press the OK button.
• Input the Display Name using the dial pad and press the OK button to save your entry.
• Move to another parameter with the navigation buttons and continue the session or press
the
To enter alphanumeric characters select the
for Dial Pad Mode" on page 61

User Name

A User Name (extension or phone number) is required for proper operation and must match the
user ID or account assigned in the SIP server. This is usually the number dialed to reach this line
on the phone.
To enter the User Name:
• Press the
• Select 1. Line Configuration then press the OK button.
• Select 4. User Name then press the OK button.
• Input the Name using the dial pad and press the OK button to save your entry.
• Move to another parameter with the navigation buttons and continue the session or press
the
Changing the User Name requires a reboot of the phone. When you exit the menu, you will
receive a reboot notice. Press the OK button to reboot. The IP phone must reboot to utilize the
new values entered.
To enter alphanumeric characters select the
for Dial Pad Mode" on page 61
Personalizing your Phone
button, select 2. SIP Configuration then press the OK button.
button to exit the configuration session.
for the character mapping of dial pad digits.
button, select 2. SIP Configuration then press the OK button.
button to exit the configuration session.
for the character mapping of dial pad digits.
Page 13
button. Refer to "Appendix B. Character Table
button. Refer to "Appendix B. Character Table
FortiFone™ User Guide for FON-260i