Connecting A Coaxial Audio Receiver; Connecting Headphones - JVC LT-40C540 Instruction Manual

Connections
3
Connecting an Audio Receiver Using Optical Cable
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an optical cable to connect the TV's OPTICAL
socket to an external audio receiver's audio
coaxial input socket.
2. Plug the connected devices into the mains socket
before switching on the TV.
3. Press the button on the right side panel of the TV
or on the remote control to turn on your TV.
4. Press the button on the right side panel of the TV
or the INPUT button on the remote control to display
the Source List. Use the
control to select the desired input source and then
press the OK button to confirm.
The TV's volume will not be affected. You may
control the audio level via the Audio Receiver.

Connecting Headphones

Connect your headphones to the TV's HEADPHONE
socket.
Before putting on the headphones, turn the volume
down then put the headphones on and slowly
increase the volume until you reach a comfortable
listening level.
Long-term exposure to loud music may cause
hearing damage. It is best to avoid extreme
volume when using headphones, especially for
extended periods.
18
buttons on the remote
Rear Bottom View of TV
VIDEO
Y Pb Pr L
Rear Right Side View of TV
USB HDMI2 HDMI1(ARC)
HEADPHONE
5V 500mA
Earphones Cable
(not included)
R OPTICAL HDMI3
Optical Cable
(not included)
Audio Receiver
COMMON INTERFACE (CI)
PC IN
PC AUDIO
SCART
RF