Timer Programming - JVC LT-40C540 Instruction Manual

Timer Programming

This function is used to perform scheduled recording.
The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast
programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the GUIDE button on the remote control. The EPG menu will appear.
2. Press the RED button on the remote control while on the selected
programme, the RECORDER menu will be displayed. The recording time
for the selected programme will be automatically set. If you want to adjust
the time, press the
menu for the Channel, Start time, End time and Mode.
Channel
Press the
want to record.
Start time Press the
(for Mode Once, / Month / Date and then press the
Every Day, adjust the start time.
Weekly)
End time Press the
(for Mode Once, / Month / Date and then press the
Every Day, adjust the end time.
Weekly)
Mode Press the
Every Day / Weekly.
3. After finishing all the recorder adjustments, press the OK button to confirm
your settings.
• After confirmation, you can press the GREEN button to view your
scheduled recording in the Schedule list.
• If a programme recording starts when the TV is in standby mode,
the LED indicator will flash red and blue.
buttons to select the settings in the RECORDER
buttons to select the channel that you
buttons to select the Minutes / Hour
buttons to select the Minutes / Hour
buttons to select the Auto / Once /
PVR (Personal Video Recorder)
PROGRAMME GUIDE
17 Jan 2011 22:07
DTV
800 France 2
801 France 4
802 France 5
803 ARTE
804 LCP
805 France 3
EXIT
buttons to
buttons to
801 SZTVM02
15:55-16:25 Movie 1
17 Jan
16:00 17:00
Information
Movie 1
Programme 2
Programme 3
Programme 4
Programme 5
Record Schedule Reminder
Info Date OK
RECORDER
_
+
802 SZTVM03
Start Time
59 Minute
19 Hour
May Month
29 Date
End Time
29 Minute
20 Hour
May Month
29 Date
Mode Auto
OK
BACK
8
51