Connecting A Coaxial Audio Receiver; Connecting Headphones - JVC LT-24C340 Instruction Manual

Connections
3

Connecting a Coaxial Audio Receiver

For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable to connect the TV's SPDIF
OUTPUT socket to an external audio receiver's
audio coaxial input socket.
2. Plug the connected devices into the mains socket
before switching on the TV.
3. Press the button on the right side panel of the TV
or on the remote control to turn on your TV.
4. Press the button on the right side panel of the TV
or the INPUT button on the remote control to display
the Source List. Use the
control to select the desired input source and then
press the OK button to confirm.
The TV's volume will not be affected. You may
control the audio level via the Audio Receiver.

Connecting Headphones

Connect your headphones to the TV's HEADPHONE
socket.
Before putting on the headphones, turn the volume
down then put the headphones on and slowly
increase the volume until you reach a comfortable
listening level.
Long-term exposure to loud music may cause
hearing damage. It is best to avoid extreme
volume when using headphones, especially for
extended periods.
18
buttons on the remote
Y Pb
VIDEO L
Rear Right Side View of TV
COMMON INTERFACE (CI)
USB HDMI2 HDMI1(ARC)
HEADPHONE
Earphones Cable
(not included)
Rear Right Bottom View of TV
Pr
SCART
R SPDIF OUTPUT
Audio Cable
(not included)
Audio Receiver
PC IN
PC AUDIO
RF