Target Region Setting (Uk Only); Selecting The Input Source - JVC LT-40C540 Instruction Manual

Initial Setup
4
8. Press the
the TV. Press the OK button to confirm.
If you select Ireland as the country where you will operate the TV,
a pop-up screen will be display. You will need a 4-digit activation
code for Irish tuning. This code can be found in-store, on the back
of your receipt (if bought in Ireland), or call the customer service
team / KNOWHOW
9. DTV Channel tuning will commence. This operation may take up to
3 minutes. The display will show the progress of the tuning and the
number of channels found.
10. If you want to skip the DTV tuning, press the MENU button to interrupt
the tuning half way. A pop-up screen will be displayed, press the
button to select YES to confirm. If you want to go to ATV tuning, please
refer to page 22 for details on Auto Tuning.
11. After tuning is complete, the channels are arranged in a preset order. If
you wish to skip channels, modify the preset order or rename channels,
select Channel Edit under the Channel menu (refer to page 24-25 for
details).

Target Region Setting (UK only)

During tuning your TV may have received signals from more than one
transmitter. If this has occurred the Target Region Setting screen will be
displayed. This will enable you to select the correct regional transmission for
the local news service that you require.
Press the buttons to adjust each option's setting and then press the OK
button to confirm.
Country Code
Primary Region
Secondary Region
Tertiary Region

Selecting the Input Source

1. Press the button on the right side panel of the TV or the INPUT
button on the remote control to display the Input source list.
2. Press the buttons to select the input source that you want: DTV /
ATV / AV / SCART / YPbPr / HDMI1 / HDMI2 / HDMI3 / PC / USB.
3. Press the OK button to confirm your selection. If you do not press the OK
button to confirm, the TV will automatically confirm the selected input
source within 4 seconds.
Alternative
Press the TV.RD button to switch to TV / digital radio channels
directly.
20
buttons to select the country where you will operate
This will be shown as GBR for the UK.
This will show the regional country (e.g. England,
Wales, Scotland, NI).
This will allow you to set the region for your local
news service on BBC and ITV (e.g. London, Beds
and Cambs etc).
You may receive signals from more than one
transmitter within the Secondary Region, (e.g Beds
and Cambs may have Luton or Sandy Heath).
Country
UK Ireland
Sweden Finland
France Spain
OK
Channel Tuning
DTV : 3 Channel(s)
Radio : 0 Channel(s)
Data : 0 Channel(s)
36%... 668.75MHz
Press [MENU] to skip.
Target Region Setting
Country Code
Primary Region
Secondary Region
Tertiary Region
Input Source
DTV
ATV
AV
SCART
YPbPr
HDMI1
HDMI2
HDMI3
PC
USB
OK
Norway
Denmark
Portugal
(DTV)
GBR
England
London