Connecting An Av Receiver Or Digital Sound Bar; Preparing For Internet Connectivity - JVC LT-40MAT588 User Manual

Connecting an AV receiver or digital sound bar

You can enjoy Dolby
amplifier or sound bar (not provided) in either of two ways:
•
Digital optical audio out (S/PDIF)
provided) from the TV to the Optical input on your receiver or sound bar.
•
HDMI ® ARC
connector to the HDMI
uses the Audio Return Channel (ARC) feature of the HDMI
output sound from the TV to a compatible device. To use this feature, you
must configure the TV to enable HDMI
ARC.

Preparing for Internet connectivity

If you want to watch streaming content and take advantage of the cool features of
your Roku TV, connect it to the Internet through a wireless modem/router or a
wireless access point (not provided). The TV has a built-in wireless LAN adapter.
Note: The TV supports only its internal wireless network adapter it does not support
the use of a USB network adapter.
Select 4K models have wired in addition to wireless network connectivity. To use the
wired network connection, connect an RJ-45 Ethernet cable (not provided) from the
jack on the back of your TV to your network router or switch. The wired connection
supports both 10 Base-T and 100 Base-T Ethernet.
multichannel sound from your TV if you connect a digital
Connect an HDMI ® cable (not provided) from the HDMI (ARC)
®
input on your receiver or sound bar. This connection
Connect a TOSLINK optical cable (not
®
ARC, as explained in
20
® specification to
®
Enable HDMI