Diskette Drive 0 Seek Failure; Diskette Read Failure; Diskette Subsystem Reset Failed; Gate A20 Failure - Dell OptiPlex 3010 Owner's Manual
Hide thumbs
Also See for OptiPlex 3010:
- Setup & features manual (9 pages) ,
- Technical manualbook (38 pages) ,
- Owner's manual (63 pages)
Table of Contents
Advertisement
Diskette drive 0 seek failure
Description A cable may be loose or the computer configuration information may not match the hardware
configuration.
Diskette read failure
Description The floppy disk may be defective or a cable may be loose. If the drive access light turns on, try a different
disk.
Diskette subsystem reset failed
Description
Gate A20 failure
Description One or more memory modules may be faulty or improperly seated. Reinstall the memory modules and, if
necessary, replace them.
General failure
Description The operating system is unable to carry out the command. This message is usually followed by specific
information—for example, Printer out of paper. Take the appropriate action to resolve the problem.
Hard-disk drive configuration error
Description
Hard-disk drive controller failure
Description
Hard-disk drive failure
Description
Hard-disk drive read failure
Description
50
The floppy drive controller may be faulty.
The hard drive failed initialization.
The hard drive failed initialization.
The hard drive failed initialization.
The hard drive failed initialization.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the OptiPlex 3010 and is the answer not in the manual?