Dell OptiPlex 3010 Owner's Manual page 40

Image Server
ImageServer Port
Client DHCP
Client IP
Client Subnet Mask
Client Gateway
License Status
System Logs
BIOS Events
40
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Lookup
Method" is set to "Static IP".
Specifies the primary IP port of the ImageServer with which the client communicates.
The default IP port is 06910.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer".
Specifies how the client obtains the IP address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer".
Specifies the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP" is
set to "Static IP".
Specifies the subnet mask of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP" is
set to "Static IP".
Specifies the gateway IP address for the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP" is
set to "Static IP".
Displays the current license status.
Displays the system event log and allows you to:
• Clear Log
• Mark all Entries