Memory Write/Read Failure At Address, Read Value Expecting Value; Memory Size In Cmos Invalid; Memory Tests Terminated By Keystroke; No Boot Device Available - Dell OptiPlex 3010 Owner's Manual

Hide thumbs Also See for OptiPlex 3010:
Table of Contents

Advertisement

Memory write/read failure at address, read value expecting value

Description A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary,
replace them.

Memory size in CMOS invalid

Description The amount of memory recorded in the computer configuration information does not match the memory
installed in the computer.

Memory tests terminated by keystroke

Description

No boot device available

Description
The computer cannot find the floppy disk or hard drive.

No boot sector on hard-disk drive

Description
The computer configuration information in System Setup may be incorrect.

No timer tick interrupt

Description
A chip on the system board might be malfunctioning.

Non-system disk or disk error

Description The floppy disk in drive A does not have a bootable operating system installed on it. Either replace the
floppy disk with one that has a bootable operating system, or remove the floppy disk from drive A and
restart the computer.

Not a boot diskette

Description The operating system is trying to boot to a floppy disk that does not have a bootable operating system
installed on it. Insert a bootable floppy disk.

Plug and play configuration error

Description
The computer encountered a problem while trying to configure one or more cards.
52
A keystroke interrupted the memory test.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents