Hanging Up The Pro Dock; Using The Pro Dock; Using The Headset And Microphone Combo Connector - Lenovo ThinkPad USB 3.0 Ultra Dock User Manual

Hanging up the pro dock

When you work with a ThinkPad notebook computer, a pro dock, and an external monitor together, you can
choose to hang up the pro dock on the ThinkCentre Tiny L-Bracket Mounting Kit (hereafter called L Bracket).
It saves space from your work area in this way.
For more information about the L Bracket and the supported monitor, go to www.lenovo.com/support/stands.
Align the VESA mounting holes in the pro dock with the corresponding two screws on the L bracket. Then
install the pro dock onto the L bracket vertically as shown.
Figure 8. Hanging up the pro dock on the L Bracket
You can also install the pro dock on the VESA screws on the wall in the similar way.

Using the pro dock

This section provides information on how to use the headset and microphone combo jack, Gigabit Ethernet
connector, DP output connector, DVI-I video output connector, USB connectors on the pro dock.
The pro dock expands the connection capability of your notebook computer. You can connect devices to
the appropriate connectors on the pro dock while your notebook computer is started. Normally it will take
several seconds for the notebook computer to recognize new devices.
The pro dock simplifies the connection between your notebook computer and the USB devices or the
external monitors. You can connect the USB devices and external monitors to the pro dock rather than
the notebook computer. When you want to take your notebook computer away, you can disconnect the
notebook computer from the pro dock rather than remove the USB devices and external monitors. When you
come back, simply connect your notebook computer to the pro dock to resume all previous connections and
start working at once.

Using the headset and microphone combo connector

The headset and microphone combo connector on the pro dock is a 3.5 mm microphone combined stereo
line-out connector. It works for the standard 3.5 mm headset, microphone, or speaker.
To use the headset and microphone combo connector on the pro dock, connect your headset, microphone,
or speaker to the headset and microphone combo connector.
26
User Guide