Using The Gigabit Ethernet Connector; Using The Usb Connectors; Using The Dp Output Connector; Using The Hdmi Output Connector - Lenovo ThinkPad USB 3.0 Ultra Dock User Manual

Table of Contents

Advertisement

Note: The headset and microphone combo connector on the ultra dock are automatically enabled when
you have successfully connected the ultra dock to your notebook computer and installed the device driver.
However, if you cannot hear anything from the headset connected to the headset and microphone combo
connector on the ultra dock, you can manually enable the headset and microphone combo connector on the
ultra dock. See "Manually setting the playback device and recording device" on page 11 for more information.

Using the Gigabit Ethernet connector

To use the Gigabit Ethernet connector on the ultra dock, connect the ultra dock to standard 10 Mbps, 100
Mbps, or 1000 Mbps network, and wait until the ultra dock is fully configured by the Windows operating
system.
The Gigabit Ethernet connection on the ultra dock fully supports the ThinkVantage
program.
The Gigabit Ethernet connection on the ultra dock supports Preboot execution environment (PXE) boot on
the selected Lenovo notebook computers.
There are two indicators on the top of the Gigabit Ethernet connector.
Working status
The ultra dock connects to the Ethernet successfully.
The ultra dock is transferring data.

Using the USB connectors

To use the USB 2.0 connectors, connect a USB 2.0 device such as the mouse or keyboard to the USB 2.0
connectors on the ultra dock. To use the USB 3.0 connectors, connect a USB 3.0 device to the USB 3.0
connector on the ultra dock.
When the USB device is correctly connected to a USB connector on the ultra dock, an information window
will be displayed in the Windows notification area, indicating that the USB device has been connected
to the computer.
Using the Always On USB 3.0 connectors
By default, the Always On USB 3.0 connector (
and smartphones when your computer is in the following situation:
• When your computer is on or in sleep mode
• When your computer is in hibernation mode or is turned off
• When the ultra dock is disconnected from your computer
It can supply power up to 2.4 A during the charging process. When you press the power button to turn off
the ultra dock, the ultra dock stops power supply.

Using the DP output connector

You can connect one external monitor to the ultra dock by using the DP output connector.

Using the HDMI output connector

You can connect one external monitor to the ultra dock by using the HDMI output connector.
8
User Guide
Indicator activity
The right indicator stays on in green.
The left indicator keeps flashing in amber.
) enables you to charge some mobile digital devices
®
Access Connections

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad usb 3.0 pro dock

Table of Contents