Panasonic TH-43LFE8W Operating Instructions Manual page 51

Input label
This function can change the label of the Input signal to
be displayed.
Input label
HDMI1 HDMI1
HDMI2 HDMI2
DVI-D
PC
VIDEO VIDEO
[HDMI1] [HDMI1] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[HDMI2] [HDMI2] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[DVI-D] [DVI-D] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[PC] [PC] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[VIDEO] [VIDEO] / [DVD1] / [DVD2] /
[DVD3] /[Blu-ray1] / [Blu-ray2] /
[Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
(Skip): When <INPUT> is pressed, the input will be
skipped.
DVI-D
PC
Power management settings
Set each item to reduce power consumption.
Power management settings
Power management mode
No signal power off
HDMI1 power management
HDMI2 power management
DVI-D power management
PC power management
Power save
Power management mode: On
The following fixed values are set to the menu of
power consumption reduction. Individual setting is not
available.
[No signal power off]: [Enable]
[HDMI1 power management]: [On]
[HDMI2 power management]: [On]
[DVI-D power management]: [On]
[PC power management]: [On]
[Power save]: [On]
Power management mode: Custom
The menu of the power consumption reduction is
individually set. This setting is enabled when [Power
management mode] is set to [Custom].
[No signal power off]
When this is set to [Enable], the power supply of the
unit goes off automatically when there is no operation
or sync signal for about 10 minutes.
Note
With the USB input, the unit determines no signal is
present when the USB device is not connected.
[HDMI1 power management]
[HDMI2 power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 or so seconds at HDMI1 or HDMI2 input:
Power is turned off (standby); the power
indicator lights up orange.
When pictures (sync signal) are subsequently
detected:
Power is turned on; the power indicator lights
up green.
Custom
Disable
Off
Off
Off
Off
Off
English
51