Panasonic TH-43LFE8W Operating Instructions Manual page 48

[Component/RGB-in select]
This menu is displayed when the PC signal input.
Select to match the signals from the source
connected to the PC IN terminal.
[Component] Y, P
[RGB] RGB signals
[YUV/RGB-in select]
This menu is displayed when the HDMI and PC signal
inputs.
Select to match the signals from the source
connected to the HDMI 1, HDMI 2 and DVI-D IN
terminals.
[YUV] YUV signals
[RGB] RGB signals
[Sync]
This function operates only during PC IN input.
Setting RGB/PC sync signal
[Auto]:
The H and V sync or synchronized signal is
automatically selected. When both of them have
sync, H and V sync will be selected.
[on G]:
Uses a synchronized signal on the Video G signal,
which is input from the G connector.
[HV sync]:
Uses a synchronized signal on the Video HD/VD
signal, which is input from the HD/VD connector.
Setting Component sync signal
[Auto]:
The H and V sync or synchronized signal is
automatically selected. When both of them have
sync, H and V sync will be selected.
[on Y]:
Uses a synchronized signal on the Video Y signal,
which is input from the Y connector.
[HV sync]:
Uses a synchronized signal on the Video HD/VD
signal, which is input from the HD/VD connector.
48
English
, P /Y, C , C signals
B R B R
[Cinema reality]
Faithfully reproduces videos shot with cinema
films. Set this to [Off] normally.
Note
In [ENGLISH(US)] OSD language, [Cinema
reality] is displayed as [3:2 PULLDOWN].
If [Cinema reality] is set to [On], videos including
movies shot at 24 frames per second are
reproduced more naturally.
If the video is unnatural with [On] set, set it to
[Off].
[Noise reduction]
Reduces picture noise.
[Off]:
Disables Noise Reduction.
[Min], [Mid], [Max]:
Sets strength of Noise Reduction.
[Auto]:
Noise reduction will be automatically selected from
[Min], [Mid] or [Max].
Note
This menu is not displayed during PC IN input.
[MPEG noise reduction]
Reduces block noise and mosquito noise on MPEG
videos.
[Off]:
Disables Noise Reduction.
[Min], [Mid], [Max]:
Sets strength of Noise Reduction.
Note
This menu is not displayed during PC IN input.
[XGA mode]
This menu is displayed during PC IN input.
This unit supports XGA signals (1024 × 768, 1280 ×
768, 1366 × 768) having different aspect ratios and
sampling rates.
[Auto]:
Automatically detects the signal.
Switch the setting to suit the input signal for better
display depending on the angle of view or display
resolution condition.
Note
After making this setting, be sure to make each
adjustment (such as [Auto setup]) on the [Position]
menu as necessary. (see page 38)