Panasonic TH-43LFE8W Operating Instructions Manual page 50

Screensaver
(For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for
any length of time.
If the display must remain on, a Screensaver should be
used.
Screensaver
2015/01/01
Start
Mode
Screensaver settings
Screensaver operation
When the Screensaver is operating, the following 5
patterns are displayed full screen for 5 seconds each,
and it will be repeated.
Dark grey
Grey Dark grey
To start Screensaver now
Select [On] in [Mode].
Select [Start] and press <ENTER>.
The menu screen will disappear and the
Screensaver will be activated.
Screensaver
2015/01/01
Start
Mode
Note
If the following buttons are pressed while the screen
saver is operating, the screen saver is cancelled.
Remote control: <RETURN>
Main unit:
<MENU> <INPUT> <+> <->
When the display is turned off, the Screensaver will
be deactivated.
To set interval of Screensaver
Select [Interval] in [Mode].
Set [Periodic time].
Press to change the time by 15 minutes.
Set [Operating time].
Press once to change the time by 1 minute.
Keep pressing down to change the time by 15
minutes.
Screensaver
2015/01/01
Start
Mode
Periodic time
Operating time
Deactivated.
50
English
10:00
THURSDAY
Off
Grey Light grey White
10:00
THURSDAY
On
<ENTER>
10:00
THURSDAY
Interval
0:00
0:00
Periodic time
Operating time
Note
It is not possible to set the duration of [Operating
time] longer than that of [Periodic time].
To set start and finish time of Screensaver
Select [Time designation] in [Mode].
Set [Start time] and [Finish time].
Press
Keep pressing down to change the time by 15
minutes.
Screensaver
Start
Mode
Start time
Finish time
Light grey
Note
Please set [Date and time] before setting [Start
time] and [Finish time]. (see page 54)
To turn the power off after Screensaver
Select [Standby after SCR saver] in [Mode].
Set [Screensaver duration].
Press
Keep pressing down to change the time by 15
minutes.
Select [Start] and press <ENTER>.
Screensaver will be activated and the power will
be turned off (Standby) at the time set.
Screensaver
Start
Mode
Screensaver duration
Note
[Screensaver duration] can be set from 0:00 to
23:59.
When this is set to [0:00], [Standby after SCR
saver] will not be activated.
once to change the time by 1 minute.
2015/01/01 10:00
THURSDAY
Time designation
0:00
0:00
once to change the time by 1 minute.
10:00
2015/01/01
THURSDAY
Standby after SCR saver
0:00