10. DISASSEMBLY and REASSEMBLY
10-1 PREPARATIONS and SUGGESTIONS
1)
When disassembling the engine, carefully remember the locations of individual parts so that they can be reassembled cor-
rectly. If you are uncertain of identifying some parts, it is suggested that tags be attached to them.
2) Have boxes ready to keep the disassembled parts separated by group.
3) To prevent loss or misplacement, temporarily assemble each group of disassembled parts.
4) Use the correct tools in the correct way.
10-2 HOW TO DISASSEMBLE
Order
Remarks
I
Tool
Procedures
Item
1
Remove cord bushing
by
j
(3) Disengage lead connector which con-
i
ently for correct reassem-
I
connector which connects generator to
i (2) Move control box, and disengage lead
1
Leads are colored differ-
or
(+)
screwdriver
:
generator. (See Fig.
10-
1.)
8 mm box wrench
Control box
,
(1) Remove bolts fastening control box to
:
i
S o
bolt. .
. 4
pcs
,
control box.
bly.
nects AVR in control box
to
engine,
remove cord bushing from control box,
pulling
it
hard.
and
pull
out leads. (See Fig. 10-2.)
Note: The disassembly and reassembly of the internal parts of the control box are mentioned in
10-4.
Fig. 10-
1
Fig.
10-2
-39-