Table of Contents
Advertisement
10-1 PREPARATION AND PRECAUTIONS
1) Be sure to remember the locations of individual parts when disassembling the generator so that the gen-
erator can be reassembled correctly. Tie tags noted with the necessary information to facilitate easier and
smoother reassembly.
2) For more convenience, divide the parts into several groups and store them in boxes.
3) To prevent bolts and nuts from being misplaced or installed incorrectly, place them temprorarily back at
their original position.
4) Handle disassembled parts with care; clean them before reassembly using a neutral cleaning fluid.
5 ) Use all disassembly/assembly tools properly, and use the right tool for each specific job.
6) Drain fuel tank of fuel and crankcase of oil before disassembly.
10-2 SPECIAL TOOLS FOR DISASSEMBLY AND ASSEMBLY
/
Fig. 10- 1
NO.
DESCRIPTION
NAME
OF
TOOL
TOOL NO.
I
I
1
I
230-95001-07
I
Valve spring
retainer
and
exhaust
valves
I
1
For disassembling and deassembling the intake
2
To pull out the rotor
Rotor puller
358-95001
-07
3
To pull out the valve guide
Valve guide puller
230-95002-07
Table 10- 1
- 3 1
-
Hide quick links:
Advertisement
Table of Contents
