Aiming The Strobe - Ikelite DS160 Instruction Manual

AIMING THE STROBE

AIMING THE STROBE
Use the modeling light to aim the strobe. Look thru the camera's viewfinder, and aim the
strobe so that the modeling light shines in the center of your picture area. If your subject
distance greatly changes, you should recheck the positioning of the strobe.
When using auto-focus cameras, the modeling light may be required in low light levels to
illuminate your subject to allow the camera to auto focus.
Always hold onto the center of the strobe when repositioning. Do not reposition the
strobe by holding the back of the battery pack.
DS160 Strobe
Flash Tube Modeling Light
16