Arm Systems/Strobe Mounts; Ikelite Arm Systems; Ikelite Mounts - Ikelite DS160 Instruction Manual

ARM SYSTEMS / STROBE MOUNTS

IKELITE ARM SYSTEMS

Ikelite offers several arm choices compatible with the DS160. The arm and strobe mount
are NOT supplied with the strobe. For additional information go to www.ikelite.com
Caution: Ikelite arm systems are designed for underwater use. Be careful when
transporting the system above water since some camera trays and arm adjustments may
be unable to support the weight of the strobe(s) above water.

IKELITE MOUNTS

An optional paddle-type or ball-type mount can be mounted to the underneath side of the
strobe. The mount slides into the strobe base and is secured with a screw (supplied with
optional mount). Make sure to slide the mount into the strobe base until it stops. Be
careful to not cross-thread the screw when tightening the mount. The DS160 Black
Shroud can be rotated slightly to gain better access to the strobe base with a screwdriver.
Although not necessary, you can apply a small amount of Ikelite lube around the screw
threads before attaching the strobe mount. Use Ikelite lube only (supplied with the DS160
Strobe). This will reduce the possibility of seizing and allow removal of the screw should
the mount need to be removed. Removing the mount for long storage periods will also
reduce the possibility of seizing.
Ball-Type Mount
"not included"
with DS160
12
TTL
Tes t
O
On
On
w / Li t e
Strobe Base
Fuel
Gauge
Ful l
3
- 1
Ready Li ght
- 2
2
- 3
1
- 4
Mount Screw
DS160 Shroud