Description - Hilti PM 2-LG Operating Instructions Manual

Symbols
Disposal of
power tools
or
appliances
and batteries
together with
household
waste is not
permissible.
On the tool
C A U T I O N
LASER RADIATION - DO NOT
STARE INTO BEAM
510-530nm/0.95mW max.
CLASS II LASER PRODUCT
Do not stare into the beam.

2 Description

2.1 Use of the product as directed
The PM 2-LG is a self-leveling line laser designed for leveling and alignment work. The line laser projects two green
laser lines (horizontal and vertical) and a line intersection point.
The line laser can be operated by one person.
Possible applications are: Leveling power outlets, cable trays, radiators and in other items in installation work; Leveling
suspended ceilings; Leveling and aligning doors and windows; Transferring heights; Vertical alignment of pipes.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
2.2 Items supplied with the cardboard box version
1 Line laser
1 Soft pouch
4 Batteries
1 Operating instructions
1 Manufacturer's certificate
2.3 Information displayed during operation
LED
Laser warning notices for USA based on 21 CFR 1040.
On the tool
Class 2 laser radiation. Do not look into the beam.
Laser
EN 60825‑1
Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Type:
Generation: 01
Serial no.:
Doesn't light.
Doesn't light.
Doesn't light.
Lights constantly.
Blinks twice every 10
seconds (pendulum not
locked) or every 2 seconds
(pendulum locked).
Blinks.
warning notices based
The tool is switched off.
The batteries are exhausted.
The batteries are inserted incorrectly.
The laser beam is switched on. The tool
is in operation.
The batteries are almost exhausted.
The tool is switched off but the pendu-
lum is not locked.
on IEC 60825‑1/
en
11