INSTALLATION
Connecting Rx
1.
CONNECT TO DISPLAY with included HDMI cable
2.
TURN DISPLAY ON and select correct input
3.
PLUG IN TO POWER power light goes green
Connecting Tx
1.
CONNECT INPUTS from source devices
2.
[OPTIONAL] CONNECT OUTPUT to local display if there is one
3.
PLUG IN TO POWER power light goes green
When the Tx is powered on the Rx will automatically come out of standby. If the transmitter is
powered off the receiver will switch to Standby after 10 minutes automatically.
7
TC2-HDMIP_manual_en