Summary of Contents for Vision TECHCONNECT TC2-HDMIP
-
Page 1: Owners Manual
TECHCONNECT TC2-HDMIP OWNERS MANUAL www.visionaudiovisual.com/techconnect/tc2-hdmip TC2-HDMIP_manual_en... -
Page 2: Declaration Of Conformity
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park, Clifton Moor, York, YO30 4GH. -
Page 3: Place Of Installation
WARNING SIGNS If you detect an abnormal smell or smoke, turn this product off immediately and unplug the power cord. Contact your reseller or Vision. PACKAGING Save all packing material. It is essential for shipping in the event the unit ever needs repair. -
Page 4: Transmitter ("Tx")
INTRODUCTION This product transmits 1080p (30 Hz) video and audio content around a building using the power cables already in place. It uses “Powerline” or “Homeplug” technology with a modified Quality of Service (QoS) to avoid drop-outs. TRANSMITTER (“Tx”) Source LEDs (lit solid green to show active input) Link LED (Solid green = paired / flashing green = establishing connection or unable to connect) Source Select button... -
Page 5: Receiver ("Rx")
RECEIVER (“Rx”) Source LEDs (lit solid green to show active input) Link LED (Solid green = paired / flashing green = establishing connection or unable to connect) Source Select button Power LED (Solid green = on / solid red = off) Power button Reset Button (hold down to do factory reset back to default settings) Power Input (C5 “Cloverleaf”) -
Page 6: Remote Control
REMOTE CONTROL Power Button (activates both devices) Source 1 Selection Source 2 Selection NOTE: remote can be pointed at Tx or Rx to switch inputs. WALL MOUNTING The Tx and Rx can be wall mounted. DRY WALL INSTRUCTIONS: DRILL 2 X HOLES IN WALL INSERT PLASTIC RAWL PLUGS INTO HOLES INSERT SCREWS INTO PLUGS. -
Page 7: Installation
INSTALLATION Connecting Rx CONNECT TO DISPLAY with included HDMI cable TURN DISPLAY ON and select correct input PLUG IN TO POWER power light goes green Connecting Tx CONNECT INPUTS from source devices [OPTIONAL] CONNECT OUTPUT to local display if there is one PLUG IN TO POWER power light goes green When the Tx is powered on the Rx will automatically come out of standby. - Page 8 Connecting IR Blasters It is possible to point your source remote control at the Rx, and it will relay the IR signal back to the source/s wirelessly. CONNECT IR EMITTER TO TX Correct cable has 2 x IR emitter diodes inline to control two source devices.
-
Page 9: Operation
OPERATION CHECK REMOTE CONTROL Ensure the 2 x AAA batteries are loaded into the remote control. TURN POWER ON When mains power is turned on the Tx and Rx will automatically turn • They can be powered on in any order •... -
Page 10: Troubleshooting
TROUBLESHOOTING If your system is not operating properly, please refer to the following information. Problem Correction Power indicator LED • Check power plugs are properly inserted doesn't light up • Check another device in the same power outlet to check that the power outlet is working •... -
Page 11: Specifications
SPECIFICATIONS PRODUCT DIMENSIONS: 182 x 97 x 32 mm / 7.2″ x 3.8″ x 1.3″ (width x depth x height of chassis) PRODUCT WEIGHT: 500 g (set) CONSTRUCTION MATERIAL: Plastic COLOUR: White TECHNICAL DETAILS: Maximum Video Format Supported: 1920×1200 / 1080P @ 30 Hz Video: HDMI 1.3 with HDCP (no 3d) Latency: 30 milliseconds Audio: Up to 3 Mbps, PCM... -
Page 12: Warranty
WARRANTY This product comes with a 2-year return to base warranty, effective from the date of purchase. This warranty applies only to the original purchaser and is not transferable. For the avoidance of doubt, this will be taken from the information held by the appointed national distributor at the point of sale.