Table of Contents
Advertisement
INTRODUCTION
This product transmits 1080p (30 Hz) video and audio content around a building using the
power cables already in place. It uses "Powerline" or "Homeplug" technology with a modified
Quality of Service (QoS) to avoid drop-outs.
TRANSMITTER ("Tx")
1.
Source LEDs (lit solid green to show active input)
2.
Link LED (Solid green = paired / flashing green = establishing connection or unable to
connect)
3.
Source Select button
4.
Power LED (Solid green = on / solid red = off)
5.
Power button
1.
Reset Button (hold down to do factory reset back to default settings)
2.
HDMI Inputs (Type A)
3.
Power Input (C5 "Cloverleaf")
4.
IR OUT plug IR blaster cable in here
5.
HDMI loop-though Output (type A) (source select affects this output. Only active when Tx
powered on)
6.
Service (USB-A) (plug USB stick in here to update firmware if instructed)
1
1
4
2
4
1
2
5
3
5
3
6
TC2-HDMIP_manual_en
4
Advertisement
Table of Contents
