PowerStroke PS80945 Operator's Manual

3100 psi pressure washer

Advertisement

Available languages

Available languages

OPERATOR'S MANUAL

MANUAL DEL OPERADOR

3100 PSI PRESSURE WASHER
LAVADORA A PRESIÓN DE 3 100 PSI
PS80945
To register your POWERSTROKE product, please
visit: http://register.powerstroketools.com/
Para registrar su producto de POWERSTROKE, por
favor visita: http://register.powerstroketools.com/
DO NOT USE E15 OR E85 FUEL IN THIS UNIT. IT IS A VIOLATION OF
FEDERAL LAW AND WILL DAMAGE THE UNIT AND VOID YOUR WARRANTY.
NO UTILICE COMBUSTIBLES E15 O E85 EN ESTA UNIDAD.
ESTO CONSTITUYE UNA VIOLACIÓN A LA LEY FEDERAL,
DAÑARÁ LA UNIDAD Y ANULARÁ LA GARANTÍA.
Your pressure washer has been engineered and manufactured to our high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Su lavadora de presión ha sido diseñada y fabricada de conformidad con las estrictas normas para brindar fiabilidad, facilidad
de uso y seguridad para el operador. Con el debido cuidado, le brindará muchos años de sólido y eficiente funcionamiento.
ADVERTENCIA:
antes de usar este producto.
Le agradecemos su compra.
GUARDE ESTE MANUAL PARA FUTURAS CONSULTAS
Para reducir el riesgo de lesiones, el usuario debe leer y comprender el manual del operador

CUSTOMER SERVICE

SERVICIO AL CLIENTE
USA: 1-877-617-3501
Mexico: 01 800 843 1111
www.powerstroketools.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS80945 and is the answer not in the manual?

Questions and answers

Summary of Contents for PowerStroke PS80945

  • Page 1: Customer Service

    PS80945 To register your POWERSTROKE product, please visit: http://register.powerstroketools.com/ Para registrar su producto de POWERSTROKE, por favor visita: http://register.powerstroketools.com/ DO NOT USE E15 OR E85 FUEL IN THIS UNIT. IT IS A VIOLATION OF FEDERAL LAW AND WILL DAMAGE THE UNIT AND VOID YOUR WARRANTY.
  • Page 2 See this fold-out section for all of the figures referenced in the operator’s manual. Consulte esta sección desplegable para ver todas las figuras a las que se hace referencia en el manual del operador. Fig. 1 K - Handle (mango) A - Fuel cap (tapa del combustible) F - Muffler (silenciador) B - Recoil starter (arrancador retráctil)
  • Page 3 Fig. 4 Fig. 2 Fig. 7 A - Collar (casquillo) B - Inlet coupler (acoplador de entrada) C - High pressure hose (manguera de alta presión) A - Oil cap/dipstick (tapa del aceite con varilla de Fig. 5 nivel) Fig. 8 A - Push to insert (tapa de aseguramiento del mango) Fig.
  • Page 4 Fig. 10 Fig. 12 Fig. 15 ON/OFF SWITCH INTERRUPTOR DE ENCENDIDO/APAGADO A - Trigger (gatillo) B - Slot (ranura) C - Lock out (seguro) Fig. 13 A - OFF (apagado) B - ON (encendido) Fig. 11 Fig. 16 A - Nozzle (boquilla) B - “Click”...
  • Page 5 Fig. 17 Fig. 21 Fig. 19 A - Straightened paper clip (clip para papel A - 0.030 in. [0,762 mm (0,030 pulg.)] abierto) Fig. 20 B - Nozzle (boquilla) Fig. 18 TO STORE THE MACHINE PARA GUARDAR LA MÁQUINA A - Air filter knob (perilla del filtro de aire) A - Oil cap/dipstick (tapa del aceite con varilla de B - Air filter cover (tapa del filtro de aire) nivel)
  • Page 6: Table Of Contents

    TABLE OF CONTENTS ÍNDICE DE CONTENIDO  Introduction ..................................2 Introducción  Important Safety Instructions ............................3 Instrucciones de seguridad importantes  Specific Safety Rules ................................ 4 Reglas de seguridad específicas  Symbols ..................................5-6 Símbolos  Features .................................... 7 Características ...
  • Page 7: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS checked to determine that it will operate properly and perform its intended function. Check for alignment of WARNING: moving parts, binding of moving parts, breakage of parts, Read and understand all instructions. Failure to follow all mounting, and any other conditions that may affect its instructions listed below may result in electric shock, fire operation.
  • Page 8: Specific Safety Rules

    SPECIFIC SAFETY RULES  Never direct a water stream toward people or pets,  Never store the machine with fuel in the fuel tank or any electrical device. inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers,  Before starting any cleaning operation, close doors and the like.
  • Page 9: Symbols

    SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will result DANGER: in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result WARNING: in death or serious injury.
  • Page 10: Symbols

    SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning for safe operation of this product. SYMBOL NAME EXPLANATION Gas products emit carbon monoxide, an odorless, colorless, Toxic Fumes poison gas. Breathing carbon monoxide can cause nausea, fainting, or death.
  • Page 11: Features

    FEATURES PRODUCT SPECIFICATIONS Fuel Tank Capacity ..............................0.25 gal. Maximum Pounds Per Square Inch Pressure* ......................3,100 Maximum Gallons Per Minute* ...........................2.4 Maximum Inlet Water Temperature ..........................104˚F *Max. rating determined by PWMA Standard 101 RECOIL STARTER KNOW YOUR PRESSURE WASHER See Figure 1.
  • Page 12: Assembly

    ASSEMBLY UNPACKING WARNING: This product requires assembly. To prevent accidental starting that could cause serious  Carefully remove the product and any accessories from personal injury, always disconnect the engine spark plug the box. Make sure that all items listed in the packing list wire from the spark plug when assembling parts.
  • Page 13: Assembly

    ASSEMBLY CONNECTING THE GARDEN HOSE TO THE To connect the garden hose to the machine: PRESSURE WASHER  Completely uncoil the garden hose or remove completely from reel to prevent kinks. See Figure 6. NOTE: There must be a minimum of 10 feet of unrestricted NOTICE: hose between the pressure washer intake and the hose Always observe all local regulations when connnecting...
  • Page 14: Operation

    OPERATION To add engine oil: WARNING:  Place pressure washer on a flat, level surface. Do not tilt. Do not allow familiarity with tools to make you care-  Unscrew the oil cap / dipstick by turning counter- less. Remember that a careless fraction of a second is clockwise.
  • Page 15 OPERATION When adding gas to the pressure washer, make sure the unit  Grasp the starter grip and pull slowly until resistance is felt. is sitting on a flat, level surface. If the engine is hot, let the Give the starter grip a short, brisk pull to start the engine. pressure washer cool before adding gas.
  • Page 16 OPERATION USING THE 5-IN-1 CHANGE OVER NOZZLE  Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure. There are five spray pattern settings located on the 5-in-1 To connect the nozzle to the trigger handle: Change Over Nozzle.
  • Page 17: Operation

    OPERATION WASHING WITH DETERGENT  If any soap remains in the spray, repeat with a second tank of clean water. See Figure 14 - 15.  Shut off the engine. As sold, this unit is designed for use with “downstream” pres- sure washer detergents.
  • Page 18: Maintenance

    MAINTENANCE NOZZLE MAINTENANCE See Figure 17. WARNING: Excessive pump pressure (a pulsing sensation felt while When servicing, use only identical replacement parts. squeezing the trigger) may be the result of a clogged or Use of any other parts could create a hazard or cause dirty nozzle.
  • Page 19: Maintenance

    MAINTENANCE CHANGING ENGINE LUBRICANT  Make sure the on/off switch and fuel valve are in the OFF position. See Figure 20.  Disconnect the water connection.  Shut off the engine.  Empty the pump by pulling on the starter grip and rope  Clean the area around the lubricant fill cap/dipstick, then about 6 times.
  • Page 20: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE SOLUTION Engine fails to start No fuel in tank Fill tank Water pressure in hose Squeeze trigger to relieve water pressure Spark plug shorted or fouled Replace spark plug Spark plug is broken (cracked porcelain Replace spark plug or electrodes broken) Ignition lead wire shorted, broken, or Replace lead wire or attach to spark plug...
  • Page 21: Warranty

    WARRANTY LIMITED NON-ENGINE WARRANTY STATEMENT OWT Industries, Inc., (the Company) warrants to the original retail purchaser that this PowerStroke Product is free from defects in material and workmanship and agrees to repair or replace, at the Company’s discretion, any defective Product free of charge within these time periods from the date of purchase:  Two years, if the Product is used solely for personal, family, or household use;...
  • Page 22 WARRANTY LIMITED ENGINE WARRANTY (Effective with engines purchased from Robin America, Lake Zurich, IL, after April 1, 2008) Robin America, Inc., a division of Fuji Heavy Industries, Ltd. (herein “Subaru Robin”), warrants that each new engine sold by it will be free, under normal use and service, from defects in material and workmanship for a period listed below from the date of sale to the original retail purchaser.
  • Page 23 WARRANTY CALIFORNIA AND FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The California Air Resources Board (CARB) and the United States Environmental Protection Agency (EPA), together with Fuji Heavy Industries, Ltd. and Subaru-Robin America, Inc. are pleased to explain the Emission Control System Warranty on your new small off-road engine.
  • Page 24: Warranty

    WARRANTY EMISSION CONTROL SYSTEM WARRANTY Emission Control System Warranty (ECS Warranty) for 1997 and later model engines: (a) Applicability: This warranty shall apply to 1997 and later (5) When the engine is inspected by a Subaru-Robin America, model year engines. The ECS Warranty Period shall begin Inc.
  • Page 25 NOTES Page 21 — English...
  • Page 26 INSTRUCCIONES DE SEGURIDAD IMPORTANTES toda protección o pieza dañada para determinar si funcionará ADVERTENCIA: correctamente y desempeñará la función a la que está destinada. Verifique la alineación de las partes móviles, que Lea y comprenda todas las instrucciones. El no haya atoramiento de las mismas, que no haya piezas incumplimiento de todas las instrucciones siguientes rotas, el montaje de las piezas y cualquier otra condición puede causar descargas eléctricas, incendio o...
  • Page 27 NORMAS DE SEGURIDAD ESPECÍFICAS  Nunca dirija un chorro de agua en dirección de  Nunca guarde la máquina con combustible en el personas o animales, ni hacia dispositivos eléctricos. tanque dentro de un edificio donde haya presentes fuentes de ignición, como el agua caliente y calentadores  Antes de iniciar cualquier operación de limpieza, cierre locales, secadoras de ropa y cosas parecidas.
  • Page 28 SÍMBOLOS Las siguientes palabras de señalización y sus significados tienen el objeto de explicar los niveles de riesgo relacionados con este producto. SÍMBOLO SEÑAL SIGNIFICADO Indica una situación peligrosa inminente, la cual, si no se evita, causará la muerte PELIGRO: o lesiones serias.
  • Page 29 SÍMBOLOS Es posible que se empleen en esta producto algunos de los siguientes símbolos. Le suplicamos estudiarlos y aprender su significado. Una correcta interpretación de estos símbolos le permitirá utilizar mejor y de manera más segura la producto. SÍMBOLO NOMBRE DENOMINACIÓN/EXPLICACIÓN El combustible y los vapores del mismo son extremadamente Riesgo de incendio...
  • Page 30 CARACTERÍSTICAS ESPECIFICACIONES DEL PRODUCTO Capacidad del tanque de combustible ..................... 0,9 litros (0,25 gal) Presión máxima*............................... 3 100 psi Flujo máximo* ............................9,08 LPM (2,4 gpm) Temperatura máxima de agua de cala .......................40 ˚C (104 ˚F) *Máximo que valora determinado por el estándar de PWMA 101 FAMILIARÍCESE CON LA LAVADORA DE ARRANCADOR RETRÁCTIL PRESIÓN...
  • Page 31 ARMADO DESEMPAQUETADO ADVERTENCIA: Este producto requiere armarse. Para evitar un arranque accidental que podría causar  Extraiga cuidadosamente de la caja la herramienta y los lesiones corporales graves, siempre desconecte el cable accesorios. Asegúrese de que estén presentes todos los de la bujía del motor de la bujía misma al ensamblar las artículos enumerados en la lista de empaquetado.
  • Page 32 ARMADO NOTA: Tenga cuidado de no trasroscar la rosca, ya que  Inspeccione el cedazo de la entrada de agua. esto podría provocar que la manguera pierda durante su  Si está dañado el cedazo, no utilice la máquina sino hasta uso.
  • Page 33 FUNCIONAMIENTO Para añadir lubricante para motor: ADVERTENCIA:  Coloque la lavadora de presión sobre una superficie horizontal nivelada. No la incline. No permita que su familarización con las herramientas lo  Desenrosque la tapa del aceite con varilla de nivel; para ello, vuelva descuidado.
  • Page 34 FUNCIONAMIENTO ABASTECIMIENTO DEL TANQUE DE Antes de arrancar el motor: GASOLINA  Conecte todas las mangueras Vea la figura 8.  Revise todos los fluidos (lubricante y gasolina)  Abra el grifo del agua y luego oprima gatillo para purgar ADVERTENCIA: la presión de aire;...
  • Page 35 FUNCIONAMIENTO Para accionar el seguro:  Empuje la boquilla hacia el interior del casquillo de  Suba el seguro hasta dejarlo trabado en la ranura. conexión rápida hasta que se trabe en su lugar y quede Para quitar el seguro: debidamente asegurado.
  • Page 36 FUNCIONAMIENTO debe reemplazar la manguera inmediatamente. No use la Para aplicación de detergente a corto plazo: manguera de alta presión si el revestimiento externo Con la boquilla instalada en el tubo rociador y el motor está dañado. apagado, gire el selector de rociado al ajuste de detergente Para evitar que el revestimiento externo se dañe: de corto alcance [ ] setting.
  • Page 37 MANTENIMIENTO MANTENIMIENTO DE LAS BOQUILLAS ADVERTENCIA: Vea la figura 17. Al dar servicio a la unidad, sólo utilice piezas de repuesto La presión excesiva de la bomba (se siente una sensación idénticas. El empleo de piezas diferentes podría causar de pulsación al estar oprimiendo el gatillo) puede deberse un peligro o dañar el producto.
  • Page 38 MANTENIMIENTO CAMBIO DE ACEITE DE MOTOR  Asegúrese de que el interruptor de encendido/apagado y la válvula de combustible se en la posición OFF Vea la figura 20. (APAGADO).  Apague el motor.  Desconecte la conexión de agua.  Limpie el área alrededor de la tapa del aceite/varilla de  Vacíe la bomba;...
  • Page 39 SOLUCIÓN DE PROBLEMAS PROBLEMA CAUSA SOLUCIÓN El motor no arranca No hay combustible en el tanque Reabastezca el tanque Presión de agua en la manguera Oprima el gatillo para liberar la presión de agua Reemplace la bujía Falló o tiene corta la bujía Reemplace la bujía Se rompió...
  • Page 40 Para obtener el servicio de garantía: Llame sin cargo al 1-877-617-3501 o escriba a OWT Industries, Inc., P.O. Box 35, Hwy. 8, Pickens, SC 29671. Para obtener el servicio de garantía fuera de los EE. UU., comuníquese con el establecimiento PowerStroke local. Página 17 — Español...
  • Page 41 GARANTÍA GARANTÍA LIMITADA DE MOTOR (Vigente para motores comprados a Robin America, Lake Zurich, IL, después del 1 de abril de 2008) Robin America, Inc., una división de Fuji Heavy Industries, Ltd. (a quien en este documento se le llamará “Subaru”), garantiza que cada nuevo motor que venda estará, en condiciones de uso y servicio normales, exento de defectos en materiales y mano de obra durante el período indicado a continuación y a partir de la fecha de la venta al comprador al menudeo original.
  • Page 42 GARANTÍA DECLARACIÓN DE GARANTÍA SOBRE EL SISTEMA CONTROL DE EMISIONES FEDERAL Y DE CALIFORNIA SUS DERECHOS Y OBLIGACIONES EN RELACIÓN CON ESTA GARANTÍA La Junta de Recursos del Aire de California (CARB) y la Agencia de Protección el Medio Ambiente de los Estados Unidos (EPA), junto con Fuji Heavy Industries, Ltd.
  • Page 43 GARANTÍA GARANTÍA SOBRE EL SISTEMA DE CONTROL DE EMISIONES Garantía sobre el sistema de control de emisiones (Garantía sobre el ECS) para motores modelo 1997 y posteriores: (a) Campo de aplicación: Esta garantía se aplica a motores (4) La reparación o el cambio de cualquier pieza cubierta y modelo 1997 o posteriores.
  • Page 44 3100 PSI PRESSURE WASHER LAVADORA A PRESIÓN DE 3 100 PSI PS80945 OPERATOR’S MANUAL MANUAL DEL OPERADOR CALIFORNIA PROPOSITION 65 SERVICE For parts or service, contact your nearest authorized service dealer. Be sure WARNING: to provide all relevant information when you call or visit. For the location of the This product, its exhaust, and authorized service dealer nearest you, please call 1-877-617-3501.

Table of Contents