Tone Send Test - Oki OKIFAX 5400 Maintenance Manual

6.8

Tone Send Test

1. Purpose
To send the G3 tonal frequencies to the line.
2. Procedure
Operations:
To bring the LCD up to the desired message,
press SELECT FUNCTION key once, COPY
key twice and
message in memory)
Enter "4".
←
Press key.
After the checking, press STOP key or end
of the transmission.
*1: When indicating "2100Hz or 1100Hz SENDING", extend the tone send test for
30 more seconds by pressing the START key.
40838301TH Rev.1
←
key twice. (In case of no
The display shows:
1:SELF DIAGNOSIS
←
YES( )
4:TONE SEND TEST
←
YES( )
←
*1
4:TONE SEND TEST
2100HZ SENDING
*1
4:TONE SEND TEST
1100HZ SENDING
6 - 13
→
NO( /1-8)
4
→
NO( /1-8)
CML relay on
(5 seconds)
(5 seconds)
CML relay off