To Install Audio Support For Retail Windows 95 - HP OmniBook 4100 Reference Manual

To install audio support for retail Windows 95

If you've installed a retail version of Windows 95, you'll need to install audio support.
This driver is located on the OmniBook's hard drive or on the Recovery CD in
\Omnibook\Drivers\Win95\Audio.
1. From Control Panel, double-click Systems, then click Device Manager.
2. Open the MS Windows Sound System Compatible device under Sound, Video,
and Game Controllers, and confirm the following resources in the Resource tab:
Direct Memory Access
Direct Memory Access
Interrupt Request
Input/Output Range
Input/Output Range
Input/Output Range
3. Click Driver, then click Change Driver.
4. Click Have Disk.
5. Enter the directory of the audio drivers and click OK.
6. Click OK to accept Crystal PnP Audio System CODEC.
7. Click OK to close the Unknown Device Properties window.
8. When prompted to shut down, click No.
9. Open the Unknown device under Other devices.
10. Click on the Driver tab, then click Change Driver.
11. Select Other detected devices then click OK.
12. Click OK to accept Crystal PnP Audio System Control Registers.
13. Click OK to close the Unknown Device Properties window.
14. Click Yes to shut down and restart Windows 95.
Installing Retail Windows 95
01
00
05
0530-0537
0388-038B
0220-022F
Using the Recovery CD
1-97