Summary of Contents for hawos Billy
-
Page 1: Operating Instructions
Operating instructions hawos Billy/Queen/Mühle Congratulations on purchasing your hawos flour mill! - Page 2 – risk of injury! Before opening the housing, be absolutely sure hawos flour mills are equipped with an overcurrent to pull the mains plug to prevent the unit from circuit breaker that protects the motor from accidentally activating –...
-
Page 3: Before First Use
Only in this way will you be We are delighted that you have decided on a hawos able to use all functions safely and reliably. Hold onto flour mill! Your hawos will serve you well in these operating instructions for future reference. - Page 4 Make sure the foam rubber gasket is Milling properly seated Once connected to a power supply, your hawos mill is (arrow). ready for use. Now return the funnel to its Place a bowl under the flour outlet and adjust the previous fineness (figure 5).
- Page 5 Our mill feed table is based on this. hawos mills have undergone extensive fine setting. Cause: Despite a high degree of testing and this table was compiled accordingly for precision, the threading for the fine setting always your reference.
- Page 6 A brush is integrated in the bottom rotating “smeared”. grindstone of your hawos, which sweeps out the flour Solution: with every rotation, thereby automatically cleaning • Mill approximately 100 g brown rice the mill.
- Page 7 Opening the grinder Figure 6 Opening the grinder Remove the Attention! Turn off the mill with the On/Off top grindsto- switch and then disconnect the mains plug ne by turning before opening the housing to prevent the unit it counter- from accidentally turning on –...
-
Page 8: Technical Data
5. Any other use is deemed improper. hawos assumes no liability for cases of improper use. At the end of its lifecycle, this product must be turned in at a collection point for recycling electric and electronic appliances.