hawos Billy Operating Instructions Manual page 2

2
 ATTENTION:
Safety is paramount!

Only connect your mill to a properly installed
socket with earthing contact.

Do not use defective units.

If the main cord is damaged, only the
manufacturer, its customer service department
or a qualified professional may replace it.

Only authorised hawos professionals may
perform repairs.

Never operate your mill unattended!

Never reach into the funnel or flour outlet
when the unit is operating – risk of injury!

Before opening the housing, be absolutely sure
to pull the mains plug to prevent the unit from
accidentally activating – risk of injury!

This device is not intended for use by persons
(including children) with impaired physical,
sensory or mental abilities or who lack
experience and/or knowledge unless they are
supervised by a person responsible for their
safety or have been instructed by such a
person in how to use the device. Children must
be under supervision to ensure that they do
not play with the device.

Never immerse the device in water.
hawos flour mills are equipped with an overcurrent
circuit breaker that protects the motor from
excessive current consumption (e. g. if debris jams
the grindstones).
Funnel lid
Funnel
Brass screws
Adjusting lever
(top) fixed grindstone
Grinding chamber
(bottom) rotating
grindstone
Flour outlet
On/Off switch
Safety is paramount