Operating instructions hawos Easy Congratulations on purchasing your hawos flour mill!
Page 2
If this occurs, set the On/ This device is not intended for use by persons Off switch to “Off”. Once your hawos mill has (including children) with impaired physical, cooled off, you can use it again.
Only in this way will you be hawos! able to use all functions safely and reliably. Hold onto Your hawos will serve you well in preparing your these operating instructions for future reference. Pass natural food cuisine for many years to come. Please...
Page 4
Please first read the section “Before first use” (P. 3) and the safety notes (P. 2)! Milling Once connected to a power supply, your hawos mill is Figure 1: Turn the adjusting wheel to set the ready for use. fineness.
Page 5
Start-up Setting the fineness feed” is based on this. hawos mills have undergone You can steplessly set the fineness of the mill feed extensive testing and this table was compiled from coarse to fine with the adjusting wheel. accordingly for your reference.
Page 6
If you don’t intend to use your mill for a prolonged period of time, we recommend cleaning any leftover leftovers (see the section “Opening the grinder” flour out of the grinder. This is very easy with a for this) vacuum cleaner. Set the adjusting wheel to “coarse”...
Page 7
Opening the grinder Figure 4 Opening the grinder With a Attention! Turn off the mill with the On/Off screwdriver, switch and then disconnect the mains plug remove the before opening the housing to prevent the device brake screw on from accidentally turning on –...
Service If you have questions about your mill, please give us a call or write us an e-mail, our customer service team is happy to assist you. Tel.: +49 (0) 6172 401200 • E-mail: info@hawos.de Strong Mills – Fine Flour hawos Kornmühlen GmbH...
Need help?
Do you have a question about the Easy and is the answer not in the manual?
Questions and answers