Configure Evacuate Timer; Device Starts Evacuate Timer - Global JUNIOR V4 Installation & Commissioning Manual

8-1-4 Configure Evacuate Timer

Allows the evacuate timer to be enabled and the duration of the timer to be set.
The evacuate timer runs in parallel to all other events. Once triggered it starts counting down, when it
expires all sounders are activated. This means various sounder groups may be activated in the meantime
(and even silenced) but when the evacuate timer expires all sounders not sounding are activated.
10 minutes is the maximum duration.
The Evacuate Timer can be set to:
DISABLED
DEVICE MODE
GLOBAL MODE
In DEVICE MODE the evacuate timer is started when a device that has been configured to start the
Evacuate Timer detects a fire.
In GLOBAL MODE the Evacuate Timer is started when any device detects a fire.
NOTE:
For DEVICE MODE to work at least one device must be set to start the timer. See
programming function 8-1-5.
Once started the evacuate timer is not stopped by pressing ALARM SILENCE, although
ALARM SILENCE will still silence the sounders once they have been activated.
Disabled sounders are never activated by the evacuate timer.

8-1-5 Device Starts Evacuate Timer

Allows you to specify specific detectors that will start the Evacuate Timer.
The Evacuate Timer must be in DEVICE MODE to be activated by specific devices. See programming
function 8-1-4.
INSTALLATION & COMMISSIONING MANUAL - REVISION 1.0 - 19.FEB.2007
ADVANCED
CONTENTS CONTENTS
FUNCTIONALITY
60