Operation; Daily Inspection - Ransomes 51 Marquis Safety, Operation & Maintenance Manual

7

OPERATION

7.1 DAILY INSPECTION ___________________________________________________

1. Check the complete unit. Look for worn or loose hardware, missing or damaged components, fuel or oil
leaks. Make sure the hose connections are tight and all lines are in good condition.
2. Check the fuel supply, crankcase oil level and air cleaner. All fluids must be at the full mark with the
engine cold.
3. Set the cutting unit to the needed height of cut.
4. Test the Operator Presence And Safety Interlock System.
en-34
CAUTION
Make sure that the Engine and exhaust
are cold.
Do not check with the engine warm.
Engage the parking brake and make sure
the cutting cylinders are stopped.