Hardness Of Water - AEG Electrolux PE 8038-m Operating And Installation Instructions

Hardness of water:

• Before filling up the water reservoir,
make sure that the decalcifying Brita filter
has been soaked in cold water for at least
30 min. Follow the instructions printed on
the filter package. After this operation
insert the filter into position inside the
water reservoir as it is shown in the
figure.
• If the machine will not be used for long
periods, change the water in the tank
and drain the boiler: the machine will
hold and dispense about half a litre of
water (refer to the chapter"Hot water").
• Brita filters
supermarkets and domestic goods outlest, at
our After-Sales Service Centres or at the
Shops of Authorized Spare Parts.
• Remove the reservoir and fill it with
approximately 2.5 litres of water as shown.
•
replace the water reservoir in its own
housing tanking care to fully engage the
water valve on the base.
Downloaded from CoffeeMachineManual.com Manuals
are available from most
9