Filter - Filter-Holder - Locking Nut; Water Resrvoir; Cleaning Cycle Of The Boiler - AEG Electrolux PE 8038-m Operating And Installation Instructions

•
Always keep filters, filter-holder and locking nut clean. Any coffee residue can alter
the taste of the next cups of coffee. Wash filters and filter holder in dishwasher
every month.
•
The steam nozzle should be periodically cleaned. After Preparing milk for
cappuccinos etc. Remove the nozzle as shown in the figures above and wash with
a sponge in warm water.
Attention: Before cleaning the steam nozzle, always switch the machine
off and wait for at least 20 minutes so that the steam pipe can cool
down. This will avoid the risk of scalding.
• If the machine is not used for long periods, change the water in the reservoir and
drain the boiler by pressing the coffee button several times.
•
Clean the water reservoir periodically .
• The water reservoir can be washed in a dishwasher.
• When using the Brita filter, replace it after approximately 2000 cups of coffee or at
least every three months.
• This coffee machine is an appliance using water, therefore it is normal that some
line scale of limestone can form in its boiler.
• It is raccomended to carry out the following operations every six months:
Downloaded from CoffeeMachineManual.com Manuals
FILTER – FILTER-HOLDER – LOCKING NUT
WATER RESERVOIR

CLEANING CYCLE OF THE BOILER

31