Initial Start-Up - AEG Electrolux PE 8038-m Operating And Installation Instructions

• Ensuring the water reservoir is full, turn the steam/water knob anti clockwise
as shown above.
• Switch the coffee machine on by pressing the on-off/stand-by control pressed
until the red LED stops flashing and remains lit. This indicates the operating
condition of the machine (flashing: STAND-BY; lit ON; out OFF).
• At the same time the water temperature indicator will be on; this LED
indicates the heating phase of the water inside the boiler.Place a container
below the steam spant and press the hot water control as above.
CAUTION! Hot air and steam may precede the hot water.
Downloaded from CoffeeMachineManual.com Manuals

INITIAL START-UP

12