CoNtENtS CoNtENtS Introduction and packaging contents ..............27 Assembly ........................28 Installation of the 2 Bike ....................29 Start-up ........................29 Display change/key functions/Function overview ........30 the Synchronisation ....................30 the Basic Settings ....................31 Setting the language ....................... 32 Setting KMH/MPH ......................
. Your new ® BC 1909 HR will provide you reliable service in riding your bike for many years to come. The BC 1909 HR is a state-of-the-art measuring instrument. Please read instructions carefully to become familiar with the functions and usage of this bicycle computer.
1 INtRoDUCtIoN AND PACkAGING CoNtENtS 1 PACkAGING CoNtENtS Bike computer k Spoke magnet BC 1909 HR k cadence magnet k handlebar bracket k battery compartment key STS chest belt k fastening material including elastic belt STS speed transmitter STS cadence...
(Accessory set “BIKE 2” Ref. No.: 00417, “BIKE 2 incl. cadence” Ref. No.: 00415) 3 StARt-UP For reasons of energy consumption, the BC 1909 HR is supplied without a battery. Please insert the battery by opening the battery compartment cover with the tool provided. Once you have inserted the battery, close the battery compartment with the aid of the tool.
TOTAL TIME* * not whilst moving 5 tHE SYNCHRoNISAtIoN k Installation of the BC 1909 HR into the mounting bracket - a pairing is only possible if the bike computer is locked onto the mounting bracket. k The zeros on the speed, cadence and pulse displays are flashing.
2. Turn front wheel or pedals until the KMH or cadence display stops flashing. 1909 k While wearing the chest strap either go close to the BC 1909 HR or climb on the bicycle. As a rule, the BC 1909 HR pairs with the chest belt in less than 10 seconds.
1909 k Use MODE 1 button to switch to the preset LANGUAGE (as standard the BC 1909 HR is preset to English). k Press the SET button briefly. Display flashes. k Set the desired language using the MODE 2 button (+) or the RESET button (-).
6 tHE BASIC SEttINGS 6.4 SEt wHEEL SIZE wS BIkE 1 oR wS BIkE 2 1909 1909 1909 1909 1909 k Change the display to WS BIKE 1 or WS BIKE 2 using the MODE 1 button. k Press the SET button briefly. The first input figure is flashing. k Set the value using the MODE 2 button (+) or the RESET button (-).
Use MODE 1 button to switch to AGE display. k Press the SET button briefly. Display flashes. k Set the value using the MODE 2 button (+) or the RESET button (-). k Confirm by pressing the SET button. SET OK appears on the display. BC 1909 HR...
1909 k Use MODE 1 button to switch to the preset GENDER (as standard the BC 1909 HR is preset to MALE). k Press the SET button briefly. Display flashes. k Set the gender using the MODE 2 button (+) or the RESET button (-).
Use MODE 1 button to switch to precalculated lower or upper limit. k Press the SET button briefly. Display flashes. k Set the value using the MODE 2 button (+) or the RESET button (-). k Confirm by pressing the SET button. SET OK appears on the display. BC 1909 HR...
6 tHE BASIC SEttINGS 6.10 SEttING tHE totAL oDo BIkE 1 oR BIkE 2 1909 1909 1909 1909 1909 k Change the display to ODO BIKE 1 or ODO BIKE 2 using the MODE 1 button. k Press the SET button briefly. The first input figure is flashing. k Set the value using the MODE 2 button (+) or the RESET button (-).
Confirm by pressing the SET button. SET OK appears on the display. 6.13 EXItING BASIC SEttINGS k Press the SET button down for 3 seconds in order to stop entering settings (SETTINGS CLOSE flashes). 1909 n 3 sec. BC 1909 HR...
7 GENERAL FUNCtIoNS 7.1 DISPLAY ILLUMINAtIoN k The lighting function is switched on/off when you press the SET and RESET button at the same time. LIGHT ON/OFF is shortly displayed. k The display is illuminated when you press any button and the function is switched on when you press it again.
7 GENERAL FUNCtIoNS 7.3 SHowING/HIDING tHE CADENCE/HEARt RAtE FUNCtIoN When the BC 1909 HR is operated without cadence signal transmitter and/or chest belt, all cadence/heart rate functions (CADENCE, AVG. CAD, PULSE, AVG. PULSE, MAX. PULSE, KCAL) are hidden for this trip.
7 GENERAL FUNCtIoNS 7.5 CoUNtDowN 1909 1909 1909 1909 1909 3 sec. 3 sec. 1909 1909 1909 1909 Start Stop k Use MODE 2 to switch to COUNTDOWN +/- display. k Hold down SET button for 3 seconds (COUNTDOWN SET flashes). k Set the value using the MODE 2 button (+) or the RESET button (-).
Set the value using the MODE 2 button (+) or the RESET button (-). k Move to the next figure using the MODE 1 button. Set the value as described above. k Confirm by pressing the SET button. SET OK appears on the display. BC 1909 HR...
7 GENERAL FUNCtIoNS 7.7 RESEt DISPLAY 4 sec. 1909 1909 1909 1909 1909 k Press MODE1/2 until the desired function is displayed. k Hold down the RESET button. Display flashes. After 2 seconds only the function displayed is reset to 0. k Hold down the RESET button for longer than 4 seconds to set the display from: TRIP DIST, TRIP TIME, AVG.
7.10 tRANSPoRt MoDE If the bike is transported on a bike carrier or in the car (if clipped on the bracket), the BC 1909 HR will be put into so-called transport mode by the integrated movement sensor. TRANSPORT appears on the display. To exit this mode, you must press any button briefly.
No display Display “too MANY SIGNALS” k Have you checked the battery status on the BC 1909 HR? k Please increase the distance to the k Is the battery inserted correctly other transmitters and press any (+ facing up)? button.
We are liable to our contracting partners for defects as defined by law. Batteries are excluded from the guarantee. SIGMA Elektro GmbH Dr.-Julius-Leber-Straße 15 D-67433 Neustadt/Weinstraße Service-Tel.: +49 (0) 63 21-9120-118 E-Mail: service@sigmasport.com The manufacturer reserves the right to make technical changes. After usage the batterie can be returned. BC 1909 HR...
Page 27
You can find the CE Declaration under: www.sigmasport.com Prohlašujeme, že tento výrobek odpovídá požadavkům směrnice 1999/5/EC (NV č.426/2000 Sb.) v platném znění. BC 1909 HR...
BIKE COMPUTER TOPLINE SIGMA Elektro GmbH Dr.-Julius-Leber-Straße 15 D-67433 Neustadt/Weinstraße Tel. + 49 (0) 63 21-9120-0 Fax. + 49 (0) 63 21-9120-34 E-mail: info@sigmasport.com SIGMA SPORT USA North America 1067 Kingsland Drive Batavia, IL 60510, U.S.A. Tel. +1 630-761-1106 Fax.
Page 29
BIKE COMPUTER TOPLINE Oder k Remove the yellow foil INSTALLATION BC 1909 HR AND BC 2209 MHR www.sigmasport.com BIKE COMPUTER TOPLINE Max. 30° k Green LED = Bike 1 Max. 90 cm k Red LED k Press > 5 seconds...
Page 30
Only fOr BC 2209 MHr Oder availaBle! k In order to achieve the necessary 12 mm or less install the transmitter and the magnet closer to the wheel Max. 12 mm hub. k Rub water or cardio-gel on the electrodes aCCeSSOrie k Unit battery k new...