BenQ M2700HD User Manual page 12

2. Connect the video cable.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without
the ferrite filter) to the monitor video socket. Connect the
other end of the cable (at the end with the ferrite filter) to
the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the DVI-D Cable
Connect the plug of the DVI-D cable (at the end without
the ferrite filter) to the monitor video socket. Connect the
other end of the cable (at the end with the ferrite filter) to
the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to one of the two
HDMI ports on the monitor.
Connect the other end of the cable to the HDMI port of a
digital output device.
To Connect the Component Cable
Connect the plugs of the Component cable to the
Component video inputs on the monitor. The plugs are in
green, blue, and red respectively. Ensure that the colors of
the plugs and the terminals match when making the
connection.
Connect the other end of the cable to the Component
ports of the video output device.
Connect the corresponding audio output of your output
device to the AUDIO input terminals (L2/R2) on the
monitor using a suitable audio cable (or use the
Composite cable). The plugs used for audio transmission
are in white and red. Make sure that the colors of the
Audio plugs and the terminals match when making the
connection.
Connect the other end of the Audio cable to the Audio
ports of the video output device.
12 How to assemble your monitor hardware