Panasonic WV-SFV631L Important Information Manual page 19

Symptom
AF/SD ERROR indi-
cator lights red or
blinks red
Audio input contains
noise.
When the IR LED
lights, a part or all of
the screen appears
blurred.
When the IR LED
lights, the camera
switches between
color mode and
black-and-white
mode.
Cause/solution
• Isn't the write protect switch of the inserted SD mem-
ory card set to "LOCK"?
Unlock the write protect switch of the SD memory
card.
• Hasn't the inserted SD memory card been formatted
on a PC?
Use an SD memory card formatted on the camera.
Or install the software to format the SD memory card
on the PC. Refer to our website
(http://security.panasonic.com/pss/security/support/
info.html) for further information about the supported
software.
• Isn't the inserted SD memory card faulty?
Replace the card with a normal one.
• Check the following.
• G rounding of the camera, a switching hub or
peripheral devices are not done.
• The camera is used near an electrical power line.
• T he camera is used near a device which produces
strong magnetic field or radio waves (such as near
a TV/radio antenna, a motor of an air conditioning
system, a transformer, etc.)
When audio input still contains noise even after
checking the above possibilities, use a powered
microphone or connect audio output with low output
impedance.
• Is there a wall or other reflecting surface or object
near the camera (including areas not displayed in
images)?
Adjust the camera angle so that light from the IR LED
is not reflected.
• The subject may be too close to the camera.
Adjust the distance between the camera and the
subject.
Reference
pages
Operating
Instructions
(included in
the
CD-ROM)
Installation
Guide
Operating
Instructions
(included in
the
CD-ROM)
Operating
Instructions
(included in
the
CD-ROM)
19