Network Security - Utax P-3020 MFP User Manual

Network Security

The network security functions can be set up to protect printer operation and the print data.
The following network security settings are available.
• IPSec Setting ...8-154
• SSL Setting ...8-155
• SNMPv3 Setting ...8-163
IPSec Setting
Make this setting when you use IPSec. The default setting is Off and that of Rule Setting is also Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1 Report
2
Counter
3
********************* System/Network
Login User Name:
*******************
Login Password:
System/Network:
1
Network Setting
*********************
2
I/F Block Set.
3 Security Level
Network Setting: a b
1
TCP/IP Setting
*********************
2
WSD-SCAN
3 WSD-PRINT
1
[ Exit ]
L b
[ Login ]
2
a b
[ Exit ]
3
4
5
8-154
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
The System/Network menu appears.
Press the  or  key to select [Network Setting].
Press the OK key. The Network Setting menu appears.
Press the  or  key to select [IPSec].
Default Setting (System Menu)