Network Status - Utax P-3020 MFP User Manual

Service Setting: a b
1 Service Status
*********************
2

Network Status

3
New Developer
Print.
Are you sure?
z Network Status
[ Yes
NOTE:
When acceptance of jobs is prohibited, Print, storing functions are restricted now. is displayed and the
output is canceled.
Send Result Report
Automatically print a report of transmission result when a transmission is complete. The table below shows the
available settings. The default setting is Error Only.
Off
On
Error Only
Use the procedure below to send a Result Report.
Sys. Menu/Count.:a b
1
Report
*********************
2
Counter
3 System/Network
[ Exit ]
] [ No ]
Item
No result report printed.
Result report automatically printed.
Transmitted images can also be attached.
Result report printed only when a
transmission ends in an error. If two or
more destinations are registered, the
reports are printed only for the destinations
with the errors. Transmitted images can
also be attached.
[ Exit ]
3
Press the  or  key to select [Service Setting].
4
Press the OK key. Service Setting appears.
5
Press the  or  key to select [Service Status] or
[Network Status].
6
Press the OK key. A confirmation screen appears.
The screen shown is the one when Network Status is
selected.
7
Press [Yes] (the Left Select key). The selected report is
output. Accepted. is displayed and the screen returns to
the Service Setting menu.
Description
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Report].
8-114
Default Setting (System Menu)